Brewolution

Brewster is a 40 liter All-in-one microbrewery for home brewed Craft Beer. Whether you fancy ales, lagers, IPA’s, porters, stouts, saisons or any other style of brew. Let the new Brewster Beacon lead the way to even better brewing- experiences and results. Brewster Beacon will brighten up your life and give thousands of good moments, as well as thousands of liters of homemade craft beer. Brewster Beacon differentiates itself from competitors and the former Brewster NG, we have taken all our experience and knowledge in construction of the brewing system. This has contributed to the development of the best Brewster so far. In the new Brewster we have taken all the best from Brewster NG and loaded the new version with brilliant details and improvements.Brewolution Brewster Brewery 40L- Polished stainless steel AISI 304- Brew capacity 30 liters, total capacity 40 liters- Weight: 10 kg- Dimensions: Height and diameter: 57.5 x 36.0 cm- Heating element with a capacity of 2500 W, located at the bottom of the kettle, therefore avoiding caramelization.- The heating element is adjustable from 100 W to 2500 W, in 100 W increments.- Temperature range from 25°C to 100°C, adjustable to 0,1°C.- Temperature control up to 100°C, with +-1°C deviation.- Integrated circulation with adjustable flow rate made from stainless steel AISI 304- Stainless steel AISI 304 grain basket with built-in overflow pipe for boil dry protection. The basket can be adjusted in relation to the amount of malt. The basket holds up to 9 kg.- Clear and easy to read LCD monitor- Manual or automatic program control with alarms/reminders.- Programmable of up to 9 mashing steps and up to 9 hop/spice additions- Built-in memory with capacity for saving up to 10 recipes- Powerful 230 V magnetic pump with separate on/off button. Capacity 8 L./min.- Glass lid ensuring easy visual monitoring of the mashing process.- All Brewster Beacons are tested before shipping- Danish and English instruction manual- 220V-240V, 50Hz/60Hz EU-version power cord (UK power cord NOT included)Please note: No cooling spiral is included, we recommend at least a 7,5m cooling spiral.  Instructional videos

Brewster is a 40 liter All-in-one microbrewery with Chiller-Set for home brewed Craft Beer. Whether you fancy ales, lagers, IPA’s, porters, stouts, saisons or any other style of brew. Let the new Brewster Beacon lead the way to even better brewing- experiences and results. Brewster Beacon will brighten up your life and give thousands of good moments, as well as thousands of liters of homemade craft beer. Brewster Beacon differentiates itself from competitors and the former Brewster NG, we have taken all our experience and knowledge in construction of the brewing system. This has contributed to the development of the best Brewster so far. In the new Brewster we have taken all the best from Brewster NG and loaded the new version with brilliant details and improvements.Brewolution Brewster Brewery 30L with Chiller-Set- Chiller-Set: Cooling Spiral 8,8m with tubes and tap connectors- Polished stainless steel AISI 304- Brew capacity 30 liters, total capacity 40 liters- Weight: 10 kg- Dimensions: Height and diameter: 57.5 x 36.0 cm- Heating element with a capacity of 2500 W, located at the bottom of the kettle, therefore avoiding caramelization.- The heating element is adjustable from 100 W to 2500 W, in 100 W increments.- Temperature range from 25°C to 100°C, adjustable to 0,1°C.- Temperature control up to 100°C, with +-1°C deviation.- Integrated circulation with adjustable flow rate made from stainless steel AISI 304- Stainless steel AISI 304 grain basket with built-in overflow pipe for boil dry protection. The basket can be adjusted in relation to the amount of malt. The basket holds up to 9 kg.- Clear and easy to read LCD monitor- Manual or automatic program control with alarms/reminders.- Programmable of up to 9 mashing steps and up to 9 hop/spice additions- Built-in memory with capacity for saving up to 10 recipes- Powerful 230 V magnetic pump with separate on/off button. Capacity 8 L./min.- Glass lid ensuring easy visual monitoring of the mashing process.- All Brewster Beacons are tested before shipping- Danish and English instruction manual- 220V-240V, 50Hz/60Hz EU-version power cord (UK power cord NOT included) Instructional videos

Brewster Beacon 70L - A bigger brew system, with the possibility to brew from 20 liters and up to, if you push it to the max, 65 liters of premium craft beer. Brewster Beacon 70 is based on the same solid structures, designs and brew technical qualities as the Brewster Beacon 40, now you just brew much more of the good beer. Now you can also invite friends, family and acquaintances over to brew craft beer and experience how the sky opens up to them and a whole new life begins – with beer, actually tasting like beer. No wort chiller included.Brewolution Brewster Brewery 70L - Same solid structures, designs and brew technical qualities as the Brewster Beacon 40.- Brew capacity: 65 liters, total capacity 70 liters.- Malt capacity: Up to 18 kg malt in the grain basket.- 3.000 watt adjustable heating element.- Brew from 20 – 65 liters, if you push it to the max.- The brew capacity fits from 1 to 2 All-Grain-Kits- Mounted level gauge for easy and accurate reading of the liquid in the kettle.- Stainless steel floating bottom filter.- The grain basket can be raised in several steps.- Adjustable overflow pipe.- The wort is pumped out of the Brewster.- Pump capacity: 15 liters/min.- Dimensions: Height and diameter: 77x40,5cm- 220V-240V, 50Hz/60Hz EU-version power cord (UK power cord NOT included)Please note: No cooling spiral is included, we recommend at least a 15m cooling spiral.  Instructions manualDownload here Instructional videos

Brewster Beacon 70L - A bigger brew system, with the possibility to brew from 25 liters and up to, if you push it to the max, 65 liters of premium craft beer. Brewster Beacon 70 is based on the same solid structures, designs and brew technical qualities as the Brewster Beacon 40, now you just brew much more of the good beer. Now you can also invite friends, family and acquaintances over to brew craft beer and experience how the sky opens up to them and a whole new life begins – with beer, actually tasting like beer.Brewolution Brewster Brewery 70L with Chiller-Set- Wort Chiller 16m with hoses and connections.- Same solid structures, designs and brew technical qualities as the Brewster Beacon 40.- Brew capacity: 65 liters, total capacity 70 liters.- Malt capacity: Up to 18 kg malt in the grain basket.- 3.000 watt adjustable heating element.- Brew from 25 – 65 liters, if you push it to the max.- The brew capacity fits from 1 to 2 All-Grain-Kits- Mounted level gauge for easy and accurate reading of the liquid in the kettle.- Stainless steel floating bottom filter.- The grain basket can be raised in several steps.- Adjustable overflow pipe.- The wort is pumped out of the Brewster.- Pump capacity: 15 liters/min.- Dimensions: Height and diameter: 77x40,5cm- 220V-240V, 50Hz/60Hz EU-version power cord (UK power cord NOT included)Instructions manualDownload here Instructional videos

Heat insulating jacket for the Brewolution Brewster 40L brewing system. Provides faster heating and reduces energy consumption. Material: 5 mm neoprene foam.

Brewster Beacon 70 Kettle Wrap. Heat insulating jacket for the Brewolution Brewster 70L brewing system. Provides faster heating and reduces energy consumption. Material: 5 mm neoprene foam.

Brewster Hop Spider with fine stainless steel mesh to keep hops separated from the wort during the boil.InfoMaterial: 304 stainless steelMesh size: 500 micronsTotal height: 38 cmCylinder height: 36 cmDiameter opening: 15 cmDiameter bottom: 10 cm

Now you can upgrade your DigiBoil 35L with this stainless malt basket and false bottom. This complete kit makes it easy to mash, sparge and filter out hops in your DigiBoil.The malt basket is placed on top of the included false bottom with feet to avoid the malt closest to the heating element in the bottom gets burnt. To get the best results and an even temperature, it is recommended that you only use the weaker heating element of the Digiboil during mashing.After the mashing is complete, you sparge by lifting, rotating and placing the malt basket on the stand mounted on the inside of the top of the pot.The false bottom with feet can also continue to be needed during cooking to prevent particles from burning into the bottom. It also works as a hop and debree filter after the wort cooling when transferring the wort to the fermenter.This is included in the DigiBoil Mash Upgrade Kit:- Malt basket (Malt pipe)- False bottom for the malt pipe- False bottom with feet- Lifting handle- Stand for the malt basketDimensions:Height: 38.5 cmDiameter at the top: 29.5 cmMaterial: Stainless steel

Now you can upgrade your DigiBoil 65L with this stainless malt basket and false bottom. This complete kit makes it easy to mash, sparge and filter out hops in your DigiBoil.The malt basket is placed on top of the included false bottom with feet to avoid the malt closest to the heating element in the bottom gets burnt. To get the best results and an even temperature, it is recommended that you only use the weaker heating element of the Digiboil during mashing.After the mashing is complete, you sparge by lifting, rotating and placing the malt basket on the stand mounted on the inside of the top of the pot.The false bottom with feet can also continue to be needed during cooking to prevent particles from burning into the bottom. It also works as a hop and debree filter after the wort cooling when transferring the wort to the fermenter.This is included in the DigiBoil Mash Upgrade Kit:- Malt basket (Malt pipe)- False bottom for the malt pipe- False bottom with feet- Lifting handle- Stand for the malt basketDimensions:Height: 40cmDiameter at the top: 38,5cmMaterial: Stainless steel

Whirlpool arm for Brewster 40L that fits onto the existing recirculation pipe. It recirculates the wort and thereby making a whirlpool at the bottom of the kettle.Length 35,5 cm.

Whirlpool arm for Brewster 70L that fits onto the existing recirculation pipe. It recirculates the wort and thereby making a whirlpool at the bottom of the kettle.Length 39,5 cm.

Brewolution Recirculation Arm CAM-lock. Spare part.

A wireless hydrometer and thermometer that measures directly in the fermenter, and comminicates to the app BrewConnect via WiFi. It can be used independently in a brewing via WiFi, but the extra smart thing is that it can communicate directly with Ferminator Connect via Bluetooth. This allows a Ferminator Connect to know the exact temperature inside the beer and adjust the temperature even more precisely. The Gravity charger is charged wirelessly via the included wireless charger. It should therefore never be opened, and you avoid the risk of it leaking and destroying a brew. If the Graviator is not charged before brewing, this is not a problem. It can be charged in approx. 5 hours. The improved algorithm in Graviator, the unique design and build quality provide a high accuracy of ± 0.002 SG. The size and weight of the engraver also make it more stable under the crotch.

We have taken all the best from Ferminator Basic and made a new version with WiFi and Bluetooth. It is now possible to control your Ferminator online and see current temperatures and settings. In BrewCreator you can enter data about your brew and see all information about your Ferminator Connect. The whole thing is gathered in a nice detailed graph, where you can follow the course of the temperature and see the changes that have been made. Ferminator Connect can also communicate directly with Graviator - a wireless hydrometer measuring directly inside your fermenter (bought seperately). At room temperature (20 °) the temperature can be lowered to 0 ° or increased to 50 ° *. A powerful thermoelectric Peltier element that stands for the cold, the fan dissipates the heat generated in the process. The height of the Ferminator can be easily expanded with 22cm high expansion modules that are purchased separately. In the Basic version, there is room for, for example, a 30L plastic fermenter or a 30L Fermzilla Flat Bottom. Ferminator Ferminator is a revolution in temperature-controlled fermentation. With a Ferminator it is now possible to ferment at a precise and stable temperature. At room temp. (20 °) the Ferminator can lower the temp. to 0 ° and raise it to 50 ° *. The height can easily be extended with optional 22cm high expansion modules (buy seperately). - The Ferminator makes is possible to ferment at the precise desired temperature. For example, it is possible to ferment a pilsner or lager at the proper low temperature or an ale at high temperature to achieve lots of desired esters. - The Ferminator keeps the temperature constant during the fermentation process and can of course be adjusted at any time. A constant fermentation temperature ensures unwanted flavor notes can be avoided and that the yeast will go into a hibernation state. - The Ferminator gives you full control over the fermentation and lets you experiment with completely new flavor notes and profiles. Cooling / Heating Unit - At room temperature (20 ° C) the Ferminator can lower the temperature to 0C and raise the temperature to 50 ° C *. - Lowers temperature down to 20 ° C relative to ambient temp *. - Raises the temperature up to 30 ° C relative to ambient temp *. - The built-in fan ensures evenly temperature throughout the Ferminator. - The control unit is easily programmed and displays the actual temperature and set temperature. - The temperature sensor can be mounted either on or inside the fermentation unit with a thermowell thereby measuring the precise temperature of the liquid. - Maximum power consumption: 75 Watts, standby: 1 Watt. * Tested with Ferm inator Basic, when using expansion modules, an additional Cooling / Heating Unit may be required. Ferminator Connect - Dimensions outside: 560 L x 560 B x 651 H - Dimensions inside: 436 L x 436 W x 531 H Size fits: 32 L. Fermenter 30 L. FermZilla Flat Bottom Material Ferminator is made in EPS. Optional Expansion (Not Included, buy it seperately below) Expansion Module The expansion module has a height of 22 cm. The Ferminator can be expanded with several expansion modules an additional cooling / heating unit on the back. The expansion module and Ferminator can be disassembled taking up minimal storage space. Note that some product images contain extra equipment not included.

Ferminator is a revolution in temperature-controlled fermentation. With a Ferminator it is now possible to ferment at a precise and stable temperature. At room temp. (20°) the Ferminator can lower the temp. to 0° and raise it to 50°*. The height can easily be extended with optional 22cm high expansion modules (buy seperately).The Ferminator makes is possible to ferment at the precise desired temperature. For example, it is possible to ferment a pilsner or lager at the proper low temperature or an ale at high temperature to achieve lots of desired esters.The Ferminator keeps the temperature constant during the fermentation process and can of course be adjusted at any time. A constant fermentation temperature ensures unwanted flavour notes can be avoided and that the yeast will go into a hibernation state.The Ferminator gives you full control over the fermentation and lets you experiment with completely new flavour notes and profiles.Cooling/Heating Unit- At room temperature (20°C) the Ferminator can lower the temperature to 0C and raise the temperature to 50°C*.- Lowers temperature down to 20°C relative to ambient temp*.- Raises the temperature up to 30°C relative to ambient temp*.- The built-in fan ensures evenly temperature throughout the Ferminator.- The control unit is easily programmed and displays the actual temperature and set temperature.- The temperature sensor can be mounted either on or inside the fermentation unit with a thermowell thereby measuring the precise temperature of the liquid.- Maximum power consumption: 75 Watts, standby: 1 Watt. *Tested with Ferminator Basic, when using expansion modules, an additional Cooling/Heating Unit may be required.Ferminator Basic- Dimensions outside: 560 L x 560 B x 651 H- Dimensions inside: 436 L x 436 B x 531 HSize fits:32 L. Fermenter30 L. FermZilla Flat Bottom MaterialFerminator is made in EPS.Optional Expansion (Not Included, buy it seperately below)Expansion ModuleThe expansion module has a height of 22 cm.The Ferminator can be expanded with several expansion modules an additional cooling/ heating unit on the back. The expansion module and Ferminator can be disassembled taking up minimal storage space.Note that some product images contain extra equipment not included.

Ferminator with one expansion module. Ferminator is a revolution in temperature-controlled fermentation. With a Ferminator it is now possible to ferment at a precise and stable temperature. At room temp. (20°) the Ferminator can lower the temp. to 0° and raise it to 50°*. The height can easily be extended with optional 22cm high expansion modules (buy seperately).The Ferminator makes is possible to ferment at the precise desired temperature. For example, it is possible to ferment a pilsner or lager at the proper low temperature or an ale at high temperature to achieve lots of desired esters.The Ferminator keeps the temperature constant during the fermentation process and can of course be adjusted at any time. A constant fermentation temperature ensures unwanted flavour notes can be avoided and that the yeast will go into a hibernation state.The Ferminator gives you full control over the fermentation and lets you experiment with completely new flavour notes and profiles.Cooling/Heating Unit- At room temperature (20°C) the Ferminator can lower the temperature to 0C and raise the temperature to 50°C*.- Lowers temperature down to 20°C relative to ambient temp*.- Raises the temperature up to 30°C relative to ambient temp*.- The built-in fan ensures evenly temperature throughout the Ferminator.- The control unit is easily programmed and displays the actual temperature and set temperature.- The temperature sensor can be mounted either on or inside the fermentation unit with a thermowell thereby measuring the precise temperature of the liquid.- Maximum power consumption: 75 Watts, standby: 1 Watt. *Tested with Ferminator Basic, when using expansion modules, an additional Cooling/Heating Unit may be required.Ferminator Basic Kit 1- Dimensions outside: 560 L x 560 B x 871 H- Dimensions inside: 436 L x 436 B x 751 HSize fits:32 L. Fermenter, 3pcs Cornelius kegs or Fermzilla Allrounder 30LMaterialFerminator is made in EPS.Optional Expansion (Not Included, buy it seperately below)Expansion ModuleThe expansion module has a height of 22 cm.The Ferminator can be expanded with several expansion modules an additional cooling/ heating unit on the back. The expansion module and Ferminator can be disassembled taking up minimal storage space.Note that some product images contain extra equipment not included.

Ferminator with two expansion modules. Ferminator is a revolution in temperature-controlled fermentation. With a Ferminator it is now possible to ferment at a precise and stable temperature. At room temp. (20°) the Ferminator can lower the temp. to 0° and raise it to 50°*. The height can easily be extended with optional 22cm high expansion modules (buy seperately).The Ferminator makes is possible to ferment at the precise desired temperature. For example, it is possible to ferment a pilsner or lager at the proper low temperature or an ale at high temperature to achieve lots of desired esters.The Ferminator keeps the temperature constant during the fermentation process and can of course be adjusted at any time. A constant fermentation temperature ensures unwanted flavour notes can be avoided and that the yeast will go into a hibernation state.The Ferminator gives you full control over the fermentation and lets you experiment with completely new flavour notes and profiles.Cooling/Heating Unit- At room temperature (20°C) the Ferminator can lower the temperature to 0C and raise the temperature to 50°C*.- Lowers temperature down to 20°C relative to ambient temp*.- Raises the temperature up to 30°C relative to ambient temp*.- The built-in fan ensures evenly temperature throughout the Ferminator.- The control unit is easily programmed and displays the actual temperature and set temperature.- The temperature sensor can be mounted either on or inside the fermentation unit with a thermowell thereby measuring the precise temperature of the liquid.- Maximum power consumption: 75 Watts, standby: 1 Watt. *Tested with Ferminator Basic, when using expansion modules, an additional Cooling/Heating Unit may be required.Ferminator Basic Kit 2- Dimensions outside: 560 L x 560 B x 1091 H- Dimensions inside: 436 L x 436 B x 971 HSize fits:32 L. Fermenter, 4pcs Cornelius kegs or Fermzilla Allrounder 30L & 50L, fermzilla 27L & 35L, Brewly 30L conical fermenter.MaterialFerminator is made in EPS.Optional Expansion (Not Included, buy it seperately below)Expansion ModuleThe expansion module has a height of 22 cm.The Ferminator can be expanded with several expansion modules an additional cooling/ heating unit on the back. The expansion module and Ferminator can be disassembled taking up minimal storage space.Note that some product images contain extra equipment not included.

Ferminator with three expansion modules. Ferminator is a revolution in temperature-controlled fermentation. With a Ferminator it is now possible to ferment at a precise and stable temperature. At room temp. (20°) the Ferminator can lower the temp. to 0° and raise it to 50°*. The height can easily be extended with optional 22cm high expansion modules (buy seperately). Fits for example a 55L Fermzilla.FerminatorFerminator is a revolution in temperature-controlled fermentation. With a Ferminator it is now possible to ferment at a precise and stable temperature. At room temp. (20°) the Ferminator can lower the temp. to 0° and raise it to 50°*. The height can easily be extended with optional 22cm high expansion modules (buy seperately).- The Ferminator makes is possible to ferment at the precise desired temperature. For example, it is possible to ferment a pilsner or lager at the proper low temperature or an ale at high temperature to achieve lots of desired esters.- The Ferminator keeps the temperature constant during the fermentation process and can of course be adjusted at any time. A constant fermentation temperature ensures unwanted flavour notes can be avoided and that the yeast will go into a hibernation state.- The Ferminator gives you full control over the fermentation and lets you experiment with completely new flavour notes and profiles.Cooling/Heating Unit- At room temperature (20°C) the Ferminator can lower the temperature to 0C and raise the temperature to 50°C*.- Lowers temperature down to 20°C relative to ambient temp*.- Raises the temperature up to 30°C relative to ambient temp*.- The built-in fan ensures evenly temperature throughout the Ferminator.- The control unit is easily programmed and displays the actual temperature and set temperature.- The temperature sensor can be mounted either on or inside the fermentation unit with a thermowell thereby measuring the precise temperature of the liquid.- Maximum power consumption: 75 Watts, standby: 1 Watt. *Tested with Ferminator Basic, when using expansion modules, an additional Cooling/Heating Unit may be required.Ferminator Basic Kit 3- Dimensions outside: 560 L x 560 B x 1311 H- Dimensions inside: 436 L x 436 B x 1191 HSize fits: 55L FermzillaMaterialFerminator is made in EPS.Optional Expansion (Not Included, buy it seperately below)Expansion ModuleThe expansion module has a height of 22 cm.The Ferminator can be expanded with several expansion modules an additional cooling/ heating unit on the back. The expansion module and Ferminator can be disassembled taking up minimal storage space.Note that some product images contain extra equipment not included.

Protects the bottom of the Ferminator. The bottom plate has rounded corners and is made of stainless steel.

Ferminator Bottom Spare part.

Graviator Wireless Charger can charge a Graviator of approx. 5 hours. The charger follows the Qi standard and can charge with 5W / 7.5W / 10W. This charger will also work with your phone if it's Qi-enabled.

The Ferminator can be expanded with an additional cooling/ heating unit on the back, so you have two units that can regulate the temperature. This is a Ferminator Basic unit. At room temperature (20°) the temperature can be lowered to 0 ° or increased to 50 ° *. A powerful thermoelectric Peltier element that stands for the cold, the fan dissipates the heat generated in the process. Ferminator Basic Cooling & Heating Unit - At room temperature (20°C) the Ferminator can lower the temperature to 0C and raise the temperature to 50 ° C *. - Lowers temperature down to 20 ° C relative to ambient temp *. - Raises the temperature up to 30 ° C relative to ambient temp *. - The built-in fan ensures evenly temperature throughout the Ferminator. - The control unit is easily programmed and displays the actual temperature and set temperature. - The temperature sensor can be mounted either on or inside the fermentation unit with a thermowell thereby measuring the precise temperature of the liquid. - Maximum power consumption: 75 Watts, standby: 1 Watt. * Tested with Ferm inator Basic, when using expansion modules, an additional Cooling / Heating Unit may be required. Note that some product images contain extra equipment not included.

The Ferminator can be expanded with an additional cooling/ heating unit on the back, so you have two units that can regulate the temperature. This is a Ferminator Connect unit which can be connected to WiFi and be controlled online by BrewCreator.We have taken all the best from Ferminator Basic and made a new version with WiFi and Bluetooth. It is now possible to control your Ferminator online and see current temperatures and settings. In BrewCreator you can enter data about your brew and see all information about your Ferminator Connect. The whole thing is gathered in a nice detailed graph, where you can follow the course of the temperature and see the changes that have been made. Ferminator Connect can also communicate directly with Graviator - a wireless hydrometer measuring directly inside your fermenter (bought seperately). At room temperature (20°) the temperature can be lowered to 0 ° or increased to 50 ° *. A powerful thermoelectric Peltier element that stands for the cold, the fan dissipates the heat generated in the process. Ferminator Connect Cooling & Heating Unit - Wifi & Bluetooth- At room temperature (20°C) the Ferminator can lower the temperature to 0C and raise the temperature to 50 ° C *. - Lowers temperature down to 20 ° C relative to ambient temp *. - Raises the temperature up to 30 ° C relative to ambient temp *. - The built-in fan ensures evenly temperature throughout the Ferminator. - The control unit is easily programmed and displays the actual temperature and set temperature. - The temperature sensor can be mounted either on or inside the fermentation unit with a thermowell thereby measuring the precise temperature of the liquid. - Maximum power consumption: 75 Watts, standby: 1 Watt. * Tested with Ferm inator Basic, when using expansion modules, an additional Cooling / Heating Unit may be required. Note that some product images contain extra equipment not included.

Upgrade the Ferminator to a fullblood draft beer system with a simple plug and then pour craft beer straight away. Plug & Pour is an easy solution for transforming the Ferminator to a draft beer system with 2 taps.The following is included in Ferminator Plug & Pour Drip Tray - 2 Taps:• Plug & Pour mounting plate• Ferminator Drip Tray• Ferminator Strap• Ferminator Insert• 2 xTaps with flow control• 2 x Shanks• 2 x Ball Locks fluid• 2 x Ball Locks Co2 • Tube for liquid• Tube for Co2• Doutight fittings• T-Piece for Co2

Stainless steel bottom filter for Brewster Beacon 40 and 70-liter. Brewolution has developed a completely new "false bottom" that connects directly to the inlet to the pump instead of lying loose over the entire bottom. Instructions can be found here!

Brewolution 40L Bottom Mesh Plate for malt basket. Lower mesh disc for Brewster Beacon. For use in the Grain basket.

Make your brew system, fermentor or other equipment mobile. Useful on the brew day. 4 robust rubber wheels, 2 of them can be locked.Maximum load: 200 kg.Measurement: 57 x 57cm

Ratchet Pulley made of strong polypropylene rope and heavy-duty carabiner clips for a secure hold. Specified to 113kg.

Ferminator Top Spare part.

Brewolution Pump hose Beacon 40L. Silicone. Spare part.

The strap holds the top together, ideal if the Ferminator needs to be moved. Can also be ideal when using an extra cooling/heating unit or Plug & Pour.

The Brew Kit 25L is the perfect complement to your automatic brewery - we've put together the things you need to start brewing. Just add bottles and Recipe Kits (ingredients).Brew Kit 25L contains:- 25-liter (30L max) fermenter with med tap och lid- 25-liter (30L max) fermenter with lid (no tap)- Fermenter air lock- Bottle filler (fits the fermenter tap)- Automatic pump siphon 44cm (Note: without holder and clamp)- Grifo Bench Capper- Mash Paddle 52cm- Thermometer- Bottle Washer Spin Mini- SanitizerNote: Does not contain bottles or ingredients.

Ferminator Insert for hole Spare part. Fits in the hole where the cooling units normally is in Ferminator Top.